天天干天天操天天射嘴里-一区二区三区在线亚洲-日韩亚洲一卡二卡精品-国产全黄A一级毛片视频

歡迎訪問上海徐吉電氣有限公司網站

返回首頁|聯系我們

產品中心您當前的位置：首頁 > 產品中心 > > 全透明聚酯薄膜 > st51聚酰亞胺薄膜有機硅壓敏膠帶

基礎信息Product information

產品名稱：

51聚酰亞胺薄膜有機硅壓敏膠帶

產品型號：st

廠商性質：生產廠家

所在地：上海市

更新時間：2024-12-20

產品簡介：

51聚酰亞胺薄膜有機硅壓敏膠帶是由聚酰亞胺薄膜單面涂進口耐高溫有機硅壓敏膠粘劑制成。具有一定的表面自粘性，剝離強度、內聚力及一定的剪切強度。該膠帶適用于電機、電器、電纜、電子產品的H級絕緣。

產品特性Product characteristics

51聚酰亞胺薄膜有機硅壓敏膠帶

51聚酰亞胺薄膜有機硅壓敏膠帶產品說明

有機硅壓敏膠帶是由聚酰亞胺薄膜單面涂進口耐高溫有機硅壓敏膠粘劑制成。具有一定的表面自粘性，剝離強度、內聚力及一定的剪切強度。該膠帶適用于電機、電器、電纜、電子產品的H級絕緣。
一、技術要求：

1、外觀
膠帶盤面應平整、無氣泡、無流膠、膠層均勻。開卷時膠層不轉移，邊緣整齊無破損。
2、尺寸
2.1　
每卷膠帶長度為30m～60m或根據用戶要求
2.2　膠帶寬度

寬度為10mm～50mm，偏差為±0.5mm；寬度大于50mm的膠帶，偏差為±1.0mm，也可根據用戶的要求供給。
2.3 膠帶厚度

膠帶的厚度與允許偏差：根據用戶的要求可供給各種厚度的膠帶，允許偏差±0.008mm。
3、性能要求

參數

序號	項目名稱	單位	指標
1 2 3 4 5 6	拉伸強度斷裂伸長率對底材粘著力對鋼板粘著力工頻電器強度短期極限溫度	MPa ％ N/10mm N/10mm MV/m ℃	≥70 ≥30 ≥1.2 ≥1.2 ≥90 -70——+260

251 Polyimide Pressure Sensitive Adhesive Tape with Silicone Resin

This kind of tape is made of polyimide material with heat-resistant silicone adhesive, which shows excellent dielectric insulation properties, high heat resistant, excellent solvent resistant, mask-off gold finger contacts during wave soldering, short-term temp. 250c x 5sec, and is widely used for electrical insulation on motor, transformer, coils, PCB making and so on.

I requirements:

1.1 appearance

The film surface is smooth, bright and clean. It should have no defects such as folding, tearing, particulate, air bubble, pinhole and any external impurity. Its edges shall be orderly and no breakage.

1.2 dimension

The roll length is 30-60 meter or supplied according to the customer’s requirements. The width and allowable deviation: 10mm-50mm: ±0.5mm; >50mm: ±1mm.

1.3 thickness

Thickness and allowable deviation: all of the thickness is available, ±0.008mm.

No.	Index	Unit	Standard
1	Tensile	Mpa	≥70
2	Elongation	%	≥30
3	Peeling Tape to tape Tape to copper	N/10mm N/10mm	≥1.2 ≥1.2
4	Breakdown strength	MV/m	≥90
5	Working temperature	℃	-70---+260